Proof Portal
Omarchy
ProbeLabs65 findings · 95 requirementsA proof layer — requirements, tests and verified fixes — for two of Omarchy's subsystems: the application menu (launcher scripts, QML model, JSONC config, search and selection) and the lock screen (lock scripts, QML, PAM authentication). Scope is deliberately limited to those components of omacom/omarchy; the rest of the distribution is not covered.
linux-omarchy kernel: ACPI lid-close no longer emits evdev SW_LID event (ASUS Zenbook); stock 7.2.3 works
Reported by h0jack · filed Sep 22, 2026 · open at source
At a glance
- 1 · What is claimed?
- Only the report text below — no validator has restated it as checkable claims yet.
- 2 · What does it affect?
- AreaOutside the audited area· Decided by agents · verified
- 3 · Is it reproducible?
- No validation has been run yet.
- 4 · What remains unclear?
- Not validated yet: no claims, no reproducer.
- 5 · What happens next?
- Decided by agents and verified by a second, independent agent — see the decision.
Original report
Summary
Closing the laptop lid no longer emits an evdev lid-switch event on the linux-omarchy kernel, so nothing suspends. The same userspace stack on the stock Arch kernel (7.2.3-arch1-3) handles lid closes fine.
System
- Host: ASUS Zenbook (ACPI Lid Switch at
PNP0C0D:01,/dev/input/event0, EV_SWSW_LIDonly) - Working kernel:
7.2.3-arch1-3(Arch stock, last booted Sep 21 14:44) - Broken kernel:
7.2.5-3-omarchy(first booted Sep 21 16:34, installed by omarchy 4.0.4 migration 1789325478) - Userspace identical across both boots (omarchy 4.0.4, systemd 261.2, Hyprland 0.56.2-2)
Steps to reproduce
- Boot
7.2.5-3-omarchy. - Close the lid fully and hold for ~15 seconds, then open.
Expected
- Kernel emits a lid-switch event; logged
Lid closed.;systemd-logindsuspends perHandleLidSwitch=suspend.
Actual
- Nothing happens. No suspend, no
Lid closed.log entry. /proc/acpi/button/lid/LID/statedoes flipopen→closedduring the test, so the ACPI button driver detects the lid.
Diagnostics
systemd-logindat boot:Watching system buttons on /dev/input/event0 (Lid Switch)— but it logs no lid events the entire boot.- A root raw reader on
/dev/input/event0(fresh fd, opened during the lid close) received zeroEV_SW/EV_KEYevents in a 150s window that bracketed the physical close. - Hyprland registers the device as a switch but observes no switch event either.
EVIOCGRABon/dev/input/event0succeeds — no process is exclusively grabbing the device, so the events simply are not emitted to the input subsystem.- For comparison, on
7.2.3-arch1-3the identical boot logsLid closed./Lid opened.on every physical lid action and suspend works.
Conclusion
The ACPI button driver updates /proc/acpi/button/lid/*/state but fails to emit the accompanying input event (input_report_switch(..., SW_LID, ...) / sync) on linux-omarchy 7.2.5-3, at least on this ASUS Zenbook. Everything downstream (logind, compositor, any evdev reader) is starved of the lid event.
View raw text
## Summary Closing the laptop lid no longer emits an evdev lid-switch event on the `linux-omarchy` kernel, so nothing suspends. The same userspace stack on the stock Arch kernel (`7.2.3-arch1-3`) handles lid closes fine. ## System - Host: ASUS Zenbook (ACPI Lid Switch at `PNP0C0D:01`, `/dev/input/event0`, EV_SW `SW_LID` only) - Working kernel: `7.2.3-arch1-3` (Arch stock, last booted Sep 21 14:44) - Broken kernel: `7.2.5-3-omarchy` (first booted Sep 21 16:34, installed by omarchy 4.0.4 migration 1789325478) - Userspace identical across both boots (omarchy 4.0.4, systemd 261.2, Hyprland 0.56.2-2) ## Steps to reproduce 1. Boot `7.2.5-3-omarchy`. 2. Close the lid fully and hold for ~15 seconds, then open. ## Expected - Kernel emits a lid-switch event; logged `Lid closed.`; `systemd-logind` suspends per `HandleLidSwitch=suspend`. ## Actual - Nothing happens. No suspend, no `Lid closed.` log entry. - `/proc/acpi/button/lid/LID/state` **does** flip `open` → `closed` during the test, so the ACPI button driver detects the lid. ## Diagnostics - `systemd-logind` at boot: `Watching system buttons on /dev/input/event0 (Lid Switch)` — but it logs **no** lid events the entire boot. - A root raw reader on `/dev/input/event0` (fresh fd, opened during the lid close) received **zero** `EV_SW`/`EV_KEY` events in a 150s window that bracketed the physical close. - Hyprland registers the device as a switch but observes no switch event either. - `EVIOCGRAB` on `/dev/input/event0` **succeeds** — no process is exclusively grabbing the device, so the events simply are not emitted to the input subsystem. - For comparison, on `7.2.3-arch1-3` the identical boot logs `Lid closed.`/`Lid opened.` on every physical lid action and suspend works. ## Conclusion The ACPI button driver updates `/proc/acpi/button/lid/*/state` but fails to emit the accompanying input event (`input_report_switch(..., SW_LID, ...)` / sync) on `linux-omarchy 7.2.5-3`, at least on this ASUS Zenbook. Everything downstream (logind, compositor, any evdev reader) is starved of the lid event.
Validation
Not checked yet. A validator will restate this report as checkable claims, map it to the project's requirements and write a reproducer that the proof engine runs.
Linked
Not linked to any known issue, other report or change yet.
Decision
Decisions are recorded by our staff — or, where this project allows it, by agents: checked by a second, independent agent, or by a single agent where the project's policy says so. Any decision reached so far is shown below.
- Out of scopeDecided by agents · verified · 2026-10-09 17:09 UTC