Proof Portal

Sign in
Project overview

Omarchy

ProbeLabs65 findings · 95 requirements

A proof layer — requirements, tests and verified fixes — for two of Omarchy's subsystems: the application menu (launcher scripts, QML model, JSONC config, search and selection) and the lock screen (lock scripts, QML, PAM authentication). Scope is deliberately limited to those components of omacom/omarchy; the rest of the distribution is not covered.

Inbox
ReportR-3182GitHub issuePublicReceived

Removing USB installer when prompted results in error on framework 12

Reported by ColtonIdle · filed Oct 4, 2025Closed upstream on 2025-10-26 by ryanrhughes. GitHub close reason: completed. No closing PR or commit is recorded — "completed" alone is not evidence of a fix.

Open at source
Received and recorded verbatim. Nothing has been checked yet.

At a glance

1 · What is claimed?
Only the report text below — no validator has restated it as checkable claims yet.
2 · What does it affect?
Not yet mapped to any requirement or component.
3 · Is it reproducible?
No validation has been run yet.
4 · What remains unclear?
  • Not validated yet: no claims, no reproducer.
5 · What happens next?
Our staff decide whether the report is valid. Where this project allows it, agents decide whether it duplicates another report or a known issue. No decision has been recorded yet.

Original report

Removing USB installer when prompted results in error on framework 12revision 1 · captured 2026-10-04 11:35 UTC via poll

System details

Framework 12

What's wrong?

I installed 3.0.1 once
And 3.0.2 three times

In those 4 times, I pulled the usb out when prompted 3 times

like so
<img width="1478" height="720" alt="Image" src="https://github.com/user-attachments/assets/20c37464-b397-41f1-9ae6-f9a42e154fa6" />

which results in this error AFTER I hit reboot now

<img width="2096" height="224" alt="Image" src="https://github.com/user-attachments/assets/ae2ba444-5ada-4add-99ea-885fd1705967" />

if i then type exit, then omarchy says that install failed. if i restart the machine by holding the power button. it boots fine.

IF I instead just leave the USB inside the machine (tried 1 out of the 4 tries) it did not have any errors. so im assuming it came from ejecting the USB too early?

View raw text
### System details

Framework 12

### What's wrong?

I installed 3.0.1 once
And 3.0.2 three times

In those 4 times, I pulled the usb out when prompted 3 times

like so
<img width="1478" height="720" alt="Image" src="https://github.com/user-attachments/assets/20c37464-b397-41f1-9ae6-f9a42e154fa6" />

which results in this error AFTER I hit reboot now

<img width="2096" height="224" alt="Image" src="https://github.com/user-attachments/assets/ae2ba444-5ada-4add-99ea-885fd1705967" />

if i then type exit, then omarchy says that install failed. if i restart the machine by holding the power button. it boots fine.

IF I instead just leave the USB inside the machine (tried 1 out of the 4 tries) it did not have any errors. so im assuming it came from ejecting the USB too early?
  • 20c37464-b397-41f1-9ae6-f9a42e154fa6
  • ae2ba444-5ada-4add-99ea-885fd1705967

Validation

Not checked yet. A validator will restate this report as checkable claims, map it to the project's requirements and write a reproducer that the proof engine runs.

Linked

Not linked to any known issue, other report or change yet.

Decision

Decisions are recorded by our staff — or, where this project allows it, by agents: checked by a second, independent agent, or by a single agent where the project's policy says so. Any decision reached so far is shown below.

No decision has been recorded yet.