Proof Portal
Omarchy
ProbeLabs65 findings · 95 requirementsA proof layer — requirements, tests and verified fixes — for two of Omarchy's subsystems: the application menu (launcher scripts, QML model, JSONC config, search and selection) and the lock screen (lock scripts, QML, PAM authentication). Scope is deliberately limited to those components of omacom/omarchy; the rest of the distribution is not covered.
Omarchy Steam Game very low FPS
Reported by CAI991108 · filed Oct 12, 2025Closed upstream on 2026-02-01 by dhh. GitHub close reason: completed. No closing PR or commit is recorded — "completed" alone is not evidence of a fix.
At a glance
- 1 · What is claimed?
- Only the report text below — no validator has restated it as checkable claims yet.
- 2 · What does it affect?
- Not yet mapped to any requirement or component.
- 3 · Is it reproducible?
- No validation has been run yet.
- 4 · What remains unclear?
- Not validated yet: no claims, no reproducer.
- 5 · What happens next?
- Our staff decide whether the report is valid. Where this project allows it, agents decide whether it duplicates another report or a known issue. No decision has been recorded yet.
Original report
System details
Intel i9-7980XE - Dual NVIDIA RTX 2080 Ti - Omarchy v3.0.2
What's wrong?
tech spec goes first 🤓:
<img width="837" height="510" alt="Image" src="https://github.com/user-attachments/assets/c8692021-e21e-484b-9423-09e95b70a5d7" />
CUDA Runtime Version: 13000 # CUDA 13.0
CUDA Driver Version: 13000 # 驱动版本匹配
Driver Version: 580.95.05 # NVIDIA驱动版本
Device 0: NVIDIA GeForce RTX 2080 Ti # 识别到两块RTX 2080 Ti
Device 1: NVIDIA GeForce RTX 2080 TiMy nv-driver was automatically co-installed when I setting up the omarchy, and I check the https://www.nvidia.cn/drivers/lookup/ that the 580.95.05 is a supported version for RTX2080Ti.
I assumes that gaming goes nothing with CUDA version? (through I check anyway :), so I run the nvBanditTesthttps://github.com/NVIDIA/nvbandwidth and here's the result:
主机-设备传输 (PCIe带宽):
- CPU→GPU: ~6-13 GB/s (单卡) / ~18 GB/s (总和)
- GPU→CPU: ~6-13 GB/s (单卡) / ~19 GB/s (总和)
这些数值对于PCIe 3.0 x16来说是正常范围（理论最大值约16GB/s）。
设备间传输 (NVLink带宽):
- GPU↔GPU: ~47 GB/s (单方向) / ~94 GB/s (总和)
- 双向总带宽: ~188 GB/s
这些数值表明您的两张RTX 2080 Ti之间NVLink连接正常工作，达到了预期的性能水平。
设备本地拷贝:
- 单卡内部: ~250-260 GB/s
这是显卡内部内存带宽的测试结果，对于RTX 2080 Ti来说是合理的数值。... I pretty sure there's no Hardware Mistakes nor PCIE Bandit Mistakes? 🙂↔ And during the nvBanditTest, both GPU can go up to 100% usage (which is normal). However, when it comes to Steam games, the GPU 1 (which is my prime GPU runs on PCIE 3.0 x 16, GPU 0 runs on x8) can only utilize around 30%, and the game is stuttering like with only 12FPS
I guess it's due to something with hyprland tiling windows management .,etc? And I have no ideas on how to fix it yet 😥 I tried to setup windowrules to immedate the steam windows from tiling, but I end up broken my wifi module... : (
Other than omarchy is smooth in all ways of sense
View raw text
### System details Intel i9-7980XE - Dual NVIDIA RTX 2080 Ti - Omarchy v3.0.2 ### What's wrong? `tech spec` goes first 🤓: <img width="837" height="510" alt="Image" src="https://github.com/user-attachments/assets/c8692021-e21e-484b-9423-09e95b70a5d7" /> ``` CUDA Runtime Version: 13000 # CUDA 13.0 CUDA Driver Version: 13000 # 驱动版本匹配 Driver Version: 580.95.05 # NVIDIA驱动版本 Device 0: NVIDIA GeForce RTX 2080 Ti # 识别到两块RTX 2080 Ti Device 1: NVIDIA GeForce RTX 2080 Ti ``` My `nv-driver` was automatically co-installed when I setting up the omarchy, and I check the [https://www.nvidia.cn/drivers/lookup/](https://www.nvidia.cn/drivers/lookup/) that the `580.95.05` is a supported version for RTX2080Ti. I assumes that gaming goes nothing with `CUDA version`? (through I check anyway :), so I run the `nvBanditTest`[https://github.com/NVIDIA/nvbandwidth](https://github.com/NVIDIA/nvbandwidth) and here's the result: ``` 主机-设备传输 (PCIe带宽): - CPU→GPU: ~6-13 GB/s (单卡) / ~18 GB/s (总和) - GPU→CPU: ~6-13 GB/s (单卡) / ~19 GB/s (总和) 这些数值对于PCIe 3.0 x16来说是正常范围（理论最大值约16GB/s）。 设备间传输 (NVLink带宽): - GPU↔GPU: ~47 GB/s (单方向) / ~94 GB/s (总和) - 双向总带宽: ~188 GB/s 这些数值表明您的两张RTX 2080 Ti之间NVLink连接正常工作，达到了预期的性能水平。 设备本地拷贝: - 单卡内部: ~250-260 GB/s 这是显卡内部内存带宽的测试结果，对于RTX 2080 Ti来说是合理的数值。 ``` ... I pretty sure there's no **Hardware Mistakes** nor **PCIE Bandit Mistakes**? 🙂↔ And during the `nvBanditTest`, both GPU can go up to 100% usage (which is normal). However, when it comes to **Steam** games, the GPU 1 (which is my prime GPU runs on `PCIE 3.0 x 16`, GPU 0 runs on `x8`) can only utilize around **30%**, and the game is stuttering like with only `12FPS` I guess it's due to something with `hyprland` `tiling windows management` .,etc? And I have no ideas on how to fix it yet 😥 I tried to setup `windowrules` to immedate the steam windows from tiling, but I end up broken my wifi module... : ( Other than omarchy is smooth in all ways of sense
- c8692021-e21e-484b-9423-09e95b70a5d7
Validation
Not checked yet. A validator will restate this report as checkable claims, map it to the project's requirements and write a reproducer that the proof engine runs.
Linked
Not linked to any known issue, other report or change yet.
Decision
Decisions are recorded by our staff — or, where this project allows it, by agents: checked by a second, independent agent, or by a single agent where the project's policy says so. Any decision reached so far is shown below.
No decision has been recorded yet.