Proof Portal

Sign in
Project overview

Omarchy

ProbeLabs65 findings · 95 requirements

A proof layer — requirements, tests and verified fixes — for two of Omarchy's subsystems: the application menu (launcher scripts, QML model, JSONC config, search and selection) and the lock screen (lock scripts, QML, PAM authentication). Scope is deliberately limited to those components of omacom/omarchy; the rest of the distribution is not covered.

Inbox
ReportR-4123GitHub issuePublicReceived

Cannot connect to wifi on MacBookPro late 2015

Reported by MichalSznajder · filed Feb 15, 2026Closed upstream on 2026-07-18. GitHub close reason: completed. No closing PR or commit is recorded — "completed" alone is not evidence of a fix.

Open at source
Received and recorded verbatim. Nothing has been checked yet.

At a glance

1 · What is claimed?
Only the report text below — no validator has restated it as checkable claims yet.
2 · What does it affect?
Not yet mapped to any requirement or component.
3 · Is it reproducible?
No validation has been run yet.
4 · What remains unclear?
  • Not validated yet: no claims, no reproducer.
5 · What happens next?
Our staff decide whether the report is valid. Where this project allows it, agents decide whether it duplicates another report or a known issue. No decision has been recorded yet.

Original report

Cannot connect to wifi on MacBookPro late 2015revision 1 · captured 2026-10-04 11:49 UTC via poll

System details

MacBook Pro late 2015 (MacBookPro11,5)

What's wrong?

On my MacBook Pro late 2015 (MacBookPro11,5) you cannot connect to wifi after fresh install. wlan0 interface is visible but when password is supplied there is an error.

I had to modify /etc/default/limine and add 


After `limine-update` and reboot, password has been accepted.

Chipset below:

$ lspci | grep -i network
04:00.0 Network controller: Broadcom Inc. and subsidiaries BCM43602 802.11ac Wireless LAN SoC (rev 01)


Should patch for this go to `https://github.com/basecamp/omarchy/blob/dev/install/config/hardware/fix-bcm43xx.sh`?
View raw text
### System details

MacBook Pro late 2015 (MacBookPro11,5)

### What's wrong?

On my MacBook Pro late 2015 (MacBookPro11,5) you cannot connect to wifi after fresh install. `wlan0` interface is visible but when password is supplied there is an error.

I had to modify `/etc/default/limine` and add 

```KERNEL_CMDLINE[default]+="brcmfmac.feature_disable=0x82000"```

After `limine-update` and reboot, password has been accepted.

Chipset below:
```
$ lspci | grep -i network
04:00.0 Network controller: Broadcom Inc. and subsidiaries BCM43602 802.11ac Wireless LAN SoC (rev 01)
```

Should patch for this go to `https://github.com/basecamp/omarchy/blob/dev/install/config/hardware/fix-bcm43xx.sh`?

Validation

Not checked yet. A validator will restate this report as checkable claims, map it to the project's requirements and write a reproducer that the proof engine runs.

Linked

Not linked to any known issue, other report or change yet.

Decision

Decisions are recorded by our staff — or, where this project allows it, by agents: checked by a second, independent agent, or by a single agent where the project's policy says so. Any decision reached so far is shown below.

No decision has been recorded yet.