Proof Portal

Sign in
Project overview

Omarchy

ProbeLabs65 findings · 95 requirements

A proof layer — requirements, tests and verified fixes — for two of Omarchy's subsystems: the application menu (launcher scripts, QML model, JSONC config, search and selection) and the lock screen (lock scripts, QML, PAM authentication). Scope is deliberately limited to those components of omacom/omarchy; the rest of the distribution is not covered.

Inbox
ReportR-4285GitHub issuePublicReceived

SUPER+CTRL+Delete shortcut to toggle internal display doesn't work on lock screen after external monitor is disconnected

Reported by guidovicino · filed Apr 17, 2026Closed upstream on 2026-04-18 by dhh, as a duplicate of #5346 (R-4287). GitHub close reason: duplicate.

Open at source
Received and recorded verbatim. Nothing has been checked yet.

At a glance

1 · What is claimed?
Only the report text below — no validator has restated it as checkable claims yet.
2 · What does it affect?
Not yet mapped to any requirement or component.
3 · Is it reproducible?
No validation has been run yet.
4 · What remains unclear?
  • Not validated yet: no claims, no reproducer.
5 · What happens next?
Our staff decide whether the report is valid. Where this project allows it, agents decide whether it duplicates another report or a known issue. No decision has been recorded yet.

Original report

SUPER+CTRL+Delete shortcut to toggle internal display doesn't work on lock screen after external monitor is disconnectedrevision 1 · captured 2026-10-04 11:56 UTC via poll

System details

Dell XPS 13 pollici 2024 - Omarchy 3.5.1

What's wrong?

The display toggle shortcut introduced in 521c94b (SUPER+CTRL+Delete) is a great addition, but it breaks in this common work workflow:

Steps to reproduce:

  1. Connect an external monitor.
  2. Use the shortcut to disable the internal laptop display (e.g. at the start of a desk session).
  3. At the end of the session, suspend the laptop or lock the session (or simply forget to re-enable the laptop screen beforehand)
  4. Disconnect the external monitor.
  5. Wake the laptop (e.g. open the lid or press a key).
  6. Result: The internal display does not turn back on. The shortcut is unavailable because Hyprland is showing the lock screen, and there's no active display to interact with.

Environment: Dell XPS 13 (2024 / Lunar Lake), but the issue is likely universal on any laptop running Omarchy with an external monitor.

Root cause / discussion:

The omarchy-hyprland-monitor-internal-toggle script guards against disabling the only active monitor, but there's no mechanism to automatically re-enable the internal display when the external one is disconnected while the system is locked or suspended.

A possible direction would be a persistent service (e.g. a udev rule or a hypridle/hyprland event hook) that detects external monitor disconnection and automatically re-enables the internal display. Similar to what tools like [hyprmoncfg](https://hyprmoncfg.dev/) provide (to be tested)

I don't have bandwidth to work on this for the next couple of weeks, maybe in May.

View raw text
### System details

Dell XPS 13 pollici 2024 - Omarchy 3.5.1

### What's wrong?

The display toggle shortcut introduced in [521c94b](https://github.com/basecamp/omarchy/commit/521c94bfcab20dbda4cedab7c0070d5c0e8b297a) (`SUPER+CTRL+Delete`) is a great addition, but it breaks in this common work workflow:

**Steps to reproduce:**

1. Connect an external monitor.
2. Use the shortcut to disable the internal laptop display (e.g. at the start of a desk session).
3. At the end of the session, suspend the laptop or lock the session (or simply forget to re-enable the laptop screen beforehand)
4. Disconnect the external monitor.
5. Wake the laptop (e.g. open the lid or press a key).
6. **Result:** The internal display does not turn back on. The shortcut is unavailable because Hyprland is showing the lock screen, and there's no active display to interact with.

**Environment:** Dell XPS 13 (2024 / Lunar Lake), but the issue is likely universal on any laptop running Omarchy with an external monitor.

**Root cause / discussion:**

The `omarchy-hyprland-monitor-internal-toggle` script guards against disabling the *only* active monitor, but there's no mechanism to automatically re-enable the internal display when the external one is disconnected while the system is locked or suspended.

A possible direction would be a persistent service (e.g. a `udev` rule or a `hypridle`/`hyprland` event hook) that detects external monitor disconnection and automatically re-enables the internal display. Similar to what tools like [[hyprmoncfg](https://hyprmoncfg.dev/)](https://hyprmoncfg.dev/) provide (to be tested)

I don't have bandwidth to work on this for the next couple of weeks, maybe in May.

Validation

Not checked yet. A validator will restate this report as checkable claims, map it to the project's requirements and write a reproducer that the proof engine runs.

Linked

Not linked to any known issue, other report or change yet.

Decision

Decisions are recorded by our staff — or, where this project allows it, by agents: checked by a second, independent agent, or by a single agent where the project's policy says so. Any decision reached so far is shown below.

No decision has been recorded yet.