Proof Portal

Sign in
Project overview

Omarchy

ProbeLabs65 findings · 95 requirements

A proof layer — requirements, tests and verified fixes — for two of Omarchy's subsystems: the application menu (launcher scripts, QML model, JSONC config, search and selection) and the lock screen (lock scripts, QML, PAM authentication). Scope is deliberately limited to those components of omacom/omarchy; the rest of the distribution is not covered.

Inbox
ReportR-2138GitHub issuePublicDecided· Out of scope

Nightlight: mouse cursor outline turns fluorescent blue on NVIDIA (hardware cursor not tinted by hyprsunset)

Reported by viniciosrab · filed Oct 1, 2026 · open at source · 2 revisions

Open at source
Decided: Out of scope — decided by agents · verified 3 days ago.

At a glance

1 · What is claimed?
Only the report text below — no validator has restated it as checkable claims yet.
2 · What does it affect?
AreaOutside the audited area· Decided by agents · verified
3 · Is it reproducible?
No validation has been run yet.
4 · What remains unclear?
  • Not validated yet: no claims, no reproducer.
5 · What happens next?
Decided by agents and verified by a second, independent agent — see the decision.

Original report

Revision12 (current)
Nightlight: mouse cursor outline turns fluorescent blue on NVIDIA (hardware cursor not tinted by hyprsunset)revision 1 · captured 2026-10-01 00:05 UTC via poll

What happens

On NVIDIA, while nightlight is on (omarchy toggle nightlight, hyprsunset), the mouse cursor's outline turns fluorescent blue. With nightlight off the cursor looks normal.

Expected

The cursor is tinted like the rest of the screen, with no blue outline.

Steps to reproduce

  1. NVIDIA GPU, default cursor:no_hardware_cursors (2, auto).
  2. Run omarchy toggle nightlight.
  3. Look at the cursor over any window: its outline is bright blue.

Cause and what I tested

hyprsunset applies a CTM, which the NVIDIA hardware cursor plane doesn't receive.
- cursor:no_hardware_cursors = 1 (software cursor) fixes it, at the cost of losing the hardware cursor.
- A gamma-LUT client (wl-gammarelay-rs) also fixes it, since the gamma table does reach the hardware cursor. That's my current workaround.

System

  • Omarchy 4.0.4-1
  • Hyprland 0.56.2, hyprsunset 0.4.0-3
  • NVIDIA GeForce RTX 3060 Ti (GA104), nvidia-open-dkms 610.57.04
View raw text
## What happens
On NVIDIA, while nightlight is on (`omarchy toggle nightlight`, hyprsunset), the mouse cursor's outline turns fluorescent blue. With nightlight off the cursor looks normal.

## Expected
The cursor is tinted like the rest of the screen, with no blue outline.

## Steps to reproduce
1. NVIDIA GPU, default `cursor:no_hardware_cursors` (2, auto).
2. Run `omarchy toggle nightlight`.
3. Look at the cursor over any window: its outline is bright blue.

## Cause and what I tested
hyprsunset applies a CTM, which the NVIDIA hardware cursor plane doesn't receive.
- `cursor:no_hardware_cursors = 1` (software cursor) fixes it, at the cost of losing the hardware cursor.
- A gamma-LUT client (`wl-gammarelay-rs`) also fixes it, since the gamma table does reach the hardware cursor. That's my current workaround.

## System
- Omarchy 4.0.4-1
- Hyprland 0.56.2, hyprsunset 0.4.0-3
- NVIDIA GeForce RTX 3060 Ti (GA104), nvidia-open-dkms 610.57.04

Validation

Not checked yet. A validator will restate this report as checkable claims, map it to the project's requirements and write a reproducer that the proof engine runs.

Linked

Not linked to any known issue, other report or change yet.

Decision

Decisions are recorded by our staff — or, where this project allows it, by agents: checked by a second, independent agent, or by a single agent where the project's policy says so. Any decision reached so far is shown below.

  • Out of scopeDecided by agents · verified · 2026-10-09 20:25 UTC